Dorner Aquapruf 7400 Conveyor 8' x 6" Stainless Steel Butcher Meat Lot of 2

Description

Product Details
You are bidding on a used Dorner conveyor system. These were used to transfer meat in a butcher shop. This has been cleaned and is full tested.
We have been selling used food service equipment for over 12 years
. Please take a look at our other auctions.
Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10′ long consist of multiple sections which are bolted together.
Bearings are mounted in cast stainless steel housing for maximum performance in washdown environments.
Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated cleaning solutions.
The return belt supports are segmented plastic slide blocks and are easily removed without tools for effective cleaning.
Drive sprockets are located on a 1.5″ square stainless steel shaft without fasteners to provide optimum drive strength and cleanability
Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
Nose bar idler ends (optional) are constructed of a machined UHMW bar to provide a 1.5″ diameter transfer.
The nose bar drive configuration (optional) allows the use of the nose bar transfer on each end of the conveyor for small product transfers.
Belt lifters (optional) raise the belt form the wear strips by simply pulling an external lever for fast access and effective cleaning.
Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
When required Dorner can passivate conveyors or provide most materials in 316 or 316L stainless steel.
Specifications
Load: 20 lbs/square-foot of belt
Belt speed: 233 ft/min maximum
Wear strip material is UHMW
Continuous TIG welded 304 stainless steel frame
Stainless Steel Conveyors that Reduce Product Loss
#4 Pollish on all outside surfaces
Bearing material is 400 stainless steel
Bearing lubricant is H1 type FDA lubricant
FDA approved belting and plastic components
Shipping Policies
We have some of the lowest shipping prices in the country. Please contact us for the most accurate shipping quote, however, we will get you the best price we can. Shipping is offered via UPS and Freight, and is based on the weight and dimensions of your shipment.
Please note: We can hold any piece of equipment for 30 days (after payment), without a charge. We charge /month after that. Many of our pieces of equipment are unique and we do not know the next time we will have more. We have taken the timing out of the equation. Note that we will mark it as shipped in ebay immediately, if this is the option you are taking.